Realtime Charts for Torque Pro

★★★★★ Gives me what I've been looking for. I'm using it to monitor performance, not faults, and in this app I get the data and information I need.

★★★★★ This is pretty much perfect. I first set up Torque Pro with my Bluetooth Scan Tool OBDLink LX and PIDs specific to my model car (A 2011 Chevy Volt) and make sure those read properly when adding a gauge in Realtime Information of Torque Pro, then in Realtime Charts, I add a custom chart with the PIDs I'm interested in. I monitor 6 out of the maximum of 10 possible sensors at a rate of 200 ms (5x per second) from. Works great. When I'm finished with my drive, I can export a .CSV file to Dropbox, then on my computer at home re-graph and analyze the .CSV file in Bayview. One note about it, it records the date and time stamps in the filename in 12 hour time but does not include whether it is AM or PM in the filename or inside the .csv file, so analyzing my list of logs sorts some of them in the wrong order.

★★☆☆☆ I would like to read from the boost sensor at maximum speed like the built-in charts. But can only set to 100ms.

★★☆☆☆ Has potential to be great but; 1. Will not graph custom PIDs (always 0.0 even though they are fine in Torque dials). 2. Scale Factor of only X10s /X10s forces curves into less than 1/10 the screen, factor should be able to be set to any value. Offset setting would also be nice. 3. Y-axis cannot be zoomed or scrolled, only X-axis. 4. No control over major divisions and minor divisions on Y-axis. If not for the above downfalls, I would highly recommend.